Bench-top high vacuum and thin film products
 |
Individual radiation baffles |
 |
Low cross contamination
Individual source baffles prevent line of sight contamination between sources
High power efficiency
Polished baffle surfaces reflect radiated heat back onto evaporation source, increasing efficiency /
source temperature, and preventing unwanted pre-heating of evaporants in adjacent sources
Six options to suit every evaporation source:
| 0 | no baffle, single source only (no switch - can be added later if required) | |
| 1 | standard baffle for most filaments, boats, baffle boxes etc. (less than 24mm / 0.95") | |
| 2 | deep baffle for deep crucible heaters and baffle boxes (up to 41mm / 15/8" deep) | |
| 3 |
extra high efficiency reflector kit for very high temperature materials (eg alumina, molybdenum)
- dimple type boat source | |
| 4 | extra high efficiency reflector kit - basket type crucible heaters up to 24mm / 0.95" deep | |
| 5 | extra high efficiency reflector kit - basket type crucible heaters up to 24mm / 15/8" deep | |
| + | 5 |
as above but with high temperature source thermocouple for source temperature control (add 5 to above number) |
Use the back and next links below to view descriptions of the previous and next features, or the features & options or ordering information links to return to the part number configurator page. For more information and latest news on availability, please contact technology@oxford-vacuum.com.
|
features & options |
performance data |
specifications & dimensions |
full brochure short brochure |
ordering information |
| back | next | top | ||
Oxford Vacuum Science Ltd
39 South Street
Middle Barton
Oxfordshire
OX7 7BU UK
tel: +44 (0) 1869 349161
fax: +44 (0) 1869 349157
OVS@oxford-vacuum.com